My RWS 34P rebuild is complete and it was a tremendous success! If you decide to do this by yourself I recommend using a spring compressor-or have a friend push the trigger group retaining pins into the compression tube?
Idid the initial break in with some crosman
premier heavy paper box pellets and it didn't like 'em! Off the rest I
could hold about an inch at 30 yards. I just ordered some JSB Diabolo
Exact Heavy .177 Cal, 10.2 Grains, Domed, 500ct and tried some off the
rest. Now these were the ticket, could hold 1/2inch off the rest and
close to that offhand at 30yards. I ordered from Straight Shooters,
simply the best price, I could find?
http://www.straightshooters.com/index.html
http://www.straightshooters.com/jsb/jpjsbexact.html
http://www.pyramydair.com/cgi-bin/zoomed_model.pl?model_id=388&type=P
Ilubed a box of the JSB Heavies with some Finish line-Krytech, a dry
moly-teflon chain lube. I have had good luck before and it didn't let me
down today. Didn't test 'em on the bench, but my off hand plinking
proved dead on! Allow ample time for Krytech to dry or cure, in liquid
form it's extremely flammable!
http://www.finishlineusa.com/products/kry-tech.htm
Some
say don't lube spring gun pellets, but John Wiscombe, who built the
most powerful spring guns of his time recommended lube and invented
wiscombe honey? I'm still learning and I can rebuild or replace my gun
should it not work out. I think light pellets and my ignorance destroyed
the first spring and with lubed heavy pellets may do the same again?
BTW
Telling my friends I could make a sonic boom with a pellet from my
spring and proving it, made the looks of disbelief-all most worth
it-would first shoot a heavy pellet and then shoot a Gamo gimmick gold
raptor pellet to make the boom. Little did I know it was destroying my
spring. And these pellet contain iron or nickel. Get a good strong
speaker or magnetron magnet https://www.youtube.com/watch?v=2YZuxEtzD9c
and wave it over the Raptor pellets and watch 'em dance? I don't think
they're good for my barrel, either way my spring broke prematurely
Sam
Idid the initial break in with some crosman
premier heavy paper box pellets and it didn't like 'em! Off the rest I
could hold about an inch at 30 yards. I just ordered some JSB Diabolo
Exact Heavy .177 Cal, 10.2 Grains, Domed, 500ct and tried some off the
rest. Now these were the ticket, could hold 1/2inch off the rest and
close to that offhand at 30yards. I ordered from Straight Shooters,
simply the best price, I could find?
http://www.straightshooters.com/index.html
http://www.straightshooters.com/jsb/jpjsbexact.html
http://www.pyramydair.com/cgi-bin/zoomed_model.pl?model_id=388&type=P
Ilubed a box of the JSB Heavies with some Finish line-Krytech, a dry
moly-teflon chain lube. I have had good luck before and it didn't let me
down today. Didn't test 'em on the bench, but my off hand plinking
proved dead on! Allow ample time for Krytech to dry or cure, in liquid
form it's extremely flammable!
http://www.finishlineusa.com/products/kry-tech.htm
Some
say don't lube spring gun pellets, but John Wiscombe, who built the
most powerful spring guns of his time recommended lube and invented
wiscombe honey? I'm still learning and I can rebuild or replace my gun
should it not work out. I think light pellets and my ignorance destroyed
the first spring and with lubed heavy pellets may do the same again?
BTW
Telling my friends I could make a sonic boom with a pellet from my
spring and proving it, made the looks of disbelief-all most worth
it-would first shoot a heavy pellet and then shoot a Gamo gimmick gold
raptor pellet to make the boom. Little did I know it was destroying my
spring. And these pellet contain iron or nickel. Get a good strong
speaker or magnetron magnet https://www.youtube.com/watch?v=2YZuxEtzD9c
and wave it over the Raptor pellets and watch 'em dance? I don't think
they're good for my barrel, either way my spring broke prematurely
Sam