www.airgunsinc.org

Enjoy a not-out-of-the box free thinking forum dedicated to discussing or buying/selling your hunt, gear, favorite airgun, tactics in regard to Air Guns from the newbie to the very experienced even if you're doing nothing more than collecting!

Username:
Password:
Log me on automatically at each visit:
:: I forgot my password

Contribute to www.airgunsinc.org

Who is online?

In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests

None


Most users ever online was 66 on Sat May 28, 2011 5:55 pm


    [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Share
    avatar
    Squirrel
    Ranger Plus

    Posts : 300
    Join date : 2011-04-20

    [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by Squirrel on Tue Jul 26, 2011 1:22 pm

    I have a G4 Hand Pump I can't use because of my disabilities. There is nothing wrong with it and it's in good working condition. Click on the pictures below for more information about the pump from PA where I bought it new.

    I used it twice, or, rather, tried to and then I had my buddy Gary use it to pump up one gun. Since Gary is only here on the weekends, him and the pump aren't a matching pair for someone disabled that really can't use it like myself.

    Besides, I've got a ShoeBox compressor and I simply do not need the G4 any longer.

    I'd like this to go to someone that actually needs it either for a back up or for someone just starting out.

    But, if I am truly giving it a way, I really can't enforce that so I'll leave the potential owner up to his / her honesty in getting it. It's a $200 dollar value and not cheap.




    I'll pay for shipping to the the contiguous United States to include Alaska and Hawaii. It's free with the only strings attached is that you must be a member and must have one post of quality and at least one post in the Welcome Mat Range.

    Recipient must contact me via my email listed in my profile and must state where you found out about the free giveaway. This is a first come first serve first post rule. You must post here that you want it registering your time and place of post. Your shipping info will remain private and is NOT to be posted here.

    Staff and Site Sponsors cannot accept these types of gifts.

    Thank you for your consideration,

    -Squirrel (AKA Abda)


    Last edited by Squirrel on Fri Jul 29, 2011 11:58 am; edited 1 time in total


    _________________www.airgunsinc.org______________
    .22 Rainstorm highly modified
    .22 Infinity highly modified
    .25 Infinity converted from .22 Infinity highly modified
    .303 Wolverine Straight off the shelf---needs no modification!
    This is all I need for what I intend to do Folks!

    tbonetip
    Entering the Ranges
    Entering the Ranges

    Posts : 5
    Join date : 2011-06-28

    id love it

    Post by tbonetip on Wed Jul 27, 2011 1:10 am

    id love to use that pump. it looks like it had the right adapter on the end of the hose and everything for my marauder. and if it doesnt its only a little bit of parts to get it there. ill take it Very Happy
    avatar
    Abda
    Admin
    Admin

    Posts : 471
    Join date : 2011-04-20

    Re: [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by Abda on Wed Jul 27, 2011 2:20 am

    tbonetip wrote:id love to use that pump. it looks like it had the right adapter on the end of the hose and everything for my marauder. and if it doesn't its only a little bit of parts to get it there. ill take it Very Happy
    Okay, Tbone, it's yours! You have to email me your shipping addy with your full name and phone number. You'll probably have to sign for it.

    Now, keep in mind that the fittings that PA shows are already assembled when you get it and all you have to do is screw on the hose. You'll have to get your adapter, if you need one, for your M-rod, (didn't you say you had one?) I'm going to include a link with this post to a site that you can download the PDF and Manuel. I don't know if I still have that on hand personally.

    But you *should* be able to screw your adapter to the end of the hose fitting and go from there. If you have to get an adapter, be sure you get what rings you'll need, PA is good but they don't think of everything as they are just people too.



    You'll need to really crank down the fittings and check them for leaks when you first get started. I thought something was wrong when I first started using mine because I babied the torque I put on it thinking that if I weren't careful I'd strip it: uh, uh. I went round and round with the nice lady I got to know as Stacy (nice lady and VERY smart about air guns!) before I conceded that I was wrong, tightened them up more and had to call back eating crow! Very Happy

    Too, inside the handle is a moister collector. Not the best system in the world but it does help and you'll want to be very cautious about pumping unfiltered air into your PCP air gun. After a time it will rust out the air tube in the gun. Not good. I've seen pics of the results and it isn't a nice thing to look at. So, while not old and not used much, I think I'd get some packets to replace the ones inside the one I'm giving you. They are in the upper part of the handle real easy to get to with one little cap to remove. You should be able to get them at PA or some place similar. I keep a banner for them (PA) for handy looking up on this stuff so feel free to look to your left in this forum and check them out. I don't know if Randy at R&L Airgun Supply Inc has any but I'll be he can be competitive on the price if you'll email him about it---if he has that kind of thing. Randy's banner is at the top and above PA's so I'd give him a check see first.

    Here's the PDF: http://www.pyramydair.com/site/manuals/G4_pump_manual.pdf

    Too, notice in the pic that the hose is already assembled. That's the way I got it when it shipped: A part from the base. You'll have to screw it in too because I'm not going to ship it together like that for obvious reasons.

    I'm glad you got it. I read a lot of your posts elsewhere just now and you seem to be just the guy for it.

    Thanks for your response while I await your email and information within it.



    Last edited by Abda on Wed Jul 27, 2011 6:26 pm; edited 1 time in total


    _________________www.airgunsinc.org______________
    I've had a few. Now I've only got two.
    It's all I really need!
        





     
    avatar
    Abda
    Admin
    Admin

    Posts : 471
    Join date : 2011-04-20

    Re: [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by Abda on Wed Jul 27, 2011 12:56 pm

    Um, one thing: I missed it. You gotta put a post in the welcome mat range per the instructions. I've already been asked about it so do that and then get off an email with your personal shipping info as per the previous post and we'll get you squared away!

    Come on! I've got this thing out and looking for a box for it as we speak!

    Congrats but make the post in the welcome mat, brother!

    That and an email is all we need to get this show on the road!

    If no reply within 24 hours I'll have to put the item back up for grabs. Only fair to do so.


    _________________www.airgunsinc.org______________
    I've had a few. Now I've only got two.
    It's all I really need!
        





     
    avatar
    Abda
    Admin
    Admin

    Posts : 471
    Join date : 2011-04-20

    Re: [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by Abda on Wed Jul 27, 2011 6:00 pm

    This item may still be up for grabs. To the winner: must give full name, address and telephone number. You will have to sign for the item. Winner MUST comply with all statements and requirements in original thread offering. I'm not going to keep reminding the people who want it. Follow it or don't. Up to you so, if you want it, then follow it. Just don't get mad at me or our site if someone does follow the few requirements to get something for free if you don't.

    I'm adding in your birthday if you haven't gotten it listed at the time of your registration tnat is now a reguirement to join our site.

    I haven't gotten this yet from Tbone.

    Tbone has a little time left to comply for his win.

    Otherwise the pump goes back up for grabs.

    Hint: If you don't want me to know who you are, then you don't want the gift and I'll assume you have something you don't want me to know about. I don't have problem with this concept but before you say you want this item, don't waste the time of those that could be speaking up for it if you don't want us to know who it is that we are giving it to.

    It simply isn't fair to do that to other people.

    None of this is a reflection on Tbone but, rather, a gentle reminder that we will do our best to keep this sort of thing honest and above board.


    _________________www.airgunsinc.org______________
    I've had a few. Now I've only got two.
    It's all I really need!
        





     

    tbonetip
    Entering the Ranges
    Entering the Ranges

    Posts : 5
    Join date : 2011-06-28

    Re: [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by tbonetip on Thu Jul 28, 2011 8:11 pm

    sorry about the mixup. i think i missed the email with all of the requirements. i sent a pm with all the info asked for and if there is anything else please let me know
    avatar
    Squirrel
    Ranger Plus

    Posts : 300
    Join date : 2011-04-20

    Re: [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by Squirrel on Thu Jul 28, 2011 8:32 pm

    tbonetip wrote:sorry about the mixup. i think i missed the email with all of the requirements. i sent a pm with all the info asked for and if there is anything else please let me know
    Just waiting on your full name to go with the rest of what I've already got.

    If you get that in soon enough I'll probably be able to send it out Friday (tomorrow). Late in the day here at this time.

    I've gotten one email with your info and no PMs and just checked. Just email your full name and we are good to go!



    Waiting on you! Smile


    _________________www.airgunsinc.org______________
    .22 Rainstorm highly modified
    .22 Infinity highly modified
    .25 Infinity converted from .22 Infinity highly modified
    .303 Wolverine Straight off the shelf---needs no modification!
    This is all I need for what I intend to do Folks!
    avatar
    Abda
    Admin
    Admin

    Posts : 471
    Join date : 2011-04-20

    This item now spoken for and no longer available!

    Post by Abda on Fri Jul 29, 2011 11:55 am

    Got your email and thanks for the update!



    I'll be locking this tread and marking it solved.



    Check your member account email for an email updating you on the specifics.



    Congrats!



    Enjoy!


    _________________www.airgunsinc.org______________
    I've had a few. Now I've only got two.
    It's all I really need!
        





     

    Sponsored content

    Re: [solved]G4 Hand Pump Free for the needing and member with at least two posts

    Post by Sponsored content


      Current date/time is Sun Sep 24, 2017 2:35 pm