www.airgunsinc.org

Enjoy a not-out-of-the box free thinking forum dedicated to discussing or buying/selling your hunt, gear, favorite airgun, tactics in regard to Air Guns from the newbie to the very experienced even if you're doing nothing more than collecting!

Username:
Password:
Log me on automatically at each visit:
:: I forgot my password

Contribute to www.airgunsinc.org

Who is online?

In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests

None


Most users ever online was 66 on Sat May 28, 2011 5:55 pm


    [solved]Career Ultra 9mm Forearm Screw

    Share
    avatar
    Squirrel
    Ranger Plus

    Posts : 300
    Join date : 2011-04-20

    [solved]Career Ultra 9mm Forearm Screw

    Post by Squirrel on Wed Jul 13, 2011 7:41 am

    Forearm Screw for Career Ultra 9mm. It's just one little screw. I've lost mine.

    I'll buy the screw for a reasonable price. As a matter of fact, I'll buy two: One for me and one for one of our other members here, Nomadic Pirate---he's stripped his out and could use one as well.

    Too, if you don't have one for sale, and you have an Ultra, would anybody be so kind as to measure the one that they have so that I can try to fabricate one? This last would be IMMENSELY helpful.

    Thanks.

    Reply here to this thread or PM or Email me. Contact info within my profile.

    The bad thing about it is I think I up and threw mine away. We had a bunch of black screws laying about the place from a small construction project within the home and those buggers were scattered about. We picked them up but stragglers remained and instead of putting them up and being frugal, I got to where I’d just hit the trash can with them and I'm quite sure that's what happened to mine. Serves me right, I reckon.


    Last edited by Squirrel on Fri Aug 19, 2011 10:24 am; edited 1 time in total


    _________________www.airgunsinc.org______________
    .22 Rainstorm highly modified
    .22 Infinity highly modified
    .25 Infinity converted from .22 Infinity highly modified
    .303 Wolverine Straight off the shelf---needs no modification!
    This is all I need for what I intend to do Folks!
    avatar
    Squirrel
    Ranger Plus

    Posts : 300
    Join date : 2011-04-20

    Re: [solved]Career Ultra 9mm Forearm Screw

    Post by Squirrel on Fri Aug 19, 2011 10:24 am

    Will Piatt provided me with a screw that actually fit correctly.



    This problem is solved.



    Thanks for any consideration of this thread.


    _________________www.airgunsinc.org______________
    .22 Rainstorm highly modified
    .22 Infinity highly modified
    .25 Infinity converted from .22 Infinity highly modified
    .303 Wolverine Straight off the shelf---needs no modification!
    This is all I need for what I intend to do Folks!

      Current date/time is Thu Jul 27, 2017 11:19 am