Would like to chat with other hatsan owners about mods.
Contribute to www.airgunsinc.org
Who is online?
In total there are 2 users online :: 0 Registered, 0 Hidden and 2 Guests
None
Most users ever online was 185 on Mon Apr 12, 2021 11:01 am
Search
3 posters
Hatsans AT44's
ORairgunner- Admin
- Posts : 166
Join date : 2011-06-03
- Post n°2
Me too
I have some of these, at44pa .22, at44s10 Long .25, at44s10 long .22, and a bt65sb .25. The at44s10 long .25 I have drilled out the valve seat and it now shoots 25.4's at about 1130fps every thing else is stock. Let me know if you need mod instructions, I've been saving everything I run across. Regards, Tom
nyhunter- Admin
- Posts : 68
Join date : 2012-03-05
- Post n°3
Re: Hatsans AT44's
i have the at44s long, but i have not done any mods to it. i am getting 44fpe out of it with eun jin 28 grain domes in 22 cal. first pellet i tried in it and didnt need to go further. though they are just a tad too long in the mag. my only complaint about the gun is the mag length. need to try some jsb monsters in it one day soon i guess! it prints inside of an inch at 65yds, with plenty of power for foxes and chucks with a proper headshot.
nyhunter- Admin
- Posts : 68
Join date : 2012-03-05
- Post n°4
Re: Hatsans AT44's
for me, the gun may even have too much oomph, would like to tune it down for about 35fpe with more shots per fill. i am getting about three mags now i think from 200bar down to 150bar. i dont really need more shot count than that for the hunting i do, but it would be nice i guess, since the gun sits at the back door for random shot opportunities i may get. i have plenty of other guns with more power if i need it, so this one may get a "soft tune" as they say for springers