www.airgunsinc.org

Enjoy a not-out-of-the box free thinking forum dedicated to discussing or buying/selling your hunt, gear, favorite airgun, tactics in regard to Air Guns from the newbie to the very experienced even if you're doing nothing more than collecting!

Username:
Password:
Log me on automatically at each visit:
:: I forgot my password

Contribute to www.airgunsinc.org

Who is online?

In total there is 1 user online :: 0 Registered, 0 Hidden and 1 Guest

None


Most users ever online was 66 on Sat May 28, 2011 5:55 pm


    707 RWS Ultra 9MM thread measurement

    Share
    avatar
    ORairgunner
    Admin
    Admin

    Posts : 166
    Join date : 2011-06-03

    707 RWS Ultra 9MM thread measurement

    Post by ORairgunner on Sat Dec 17, 2011 6:36 pm

    Could somebody measure the muzzle appliance thread OD on a 707 RWS Ultra 9MM, MM or english would be fine. Thanks in advance, Tom
    avatar
    Abda
    Admin
    Admin

    Posts : 471
    Join date : 2011-04-20

    Re: 707 RWS Ultra 9MM thread measurement

    Post by Abda on Sat Dec 17, 2011 8:42 pm

    What cha try' to do, Tom?


    _________________www.airgunsinc.org______________
    I've had a few. Now I've only got two.
    It's all I really need!
        





     
    avatar
    ORairgunner
    Admin
    Admin

    Posts : 166
    Join date : 2011-06-03

    Re: 707 RWS Ultra 9MM thread measurement

    Post by ORairgunner on Sat Dec 17, 2011 10:52 pm

    Hi Abda, trying to determine if my threads are the right size, they seem to be too small. Mine measure .450" OD or 11.43MM, they should measure .472 to .490 or about 12mm to fit 12x1mm threads on the appliance. Just wondering what the rest of them have. Tom
    avatar
    Abda
    Admin
    Admin

    Posts : 471
    Join date : 2011-04-20

    Re: 707 RWS Ultra 9MM thread measurement

    Post by Abda on Sun Dec 18, 2011 8:36 am

    Tell you what, Tom, I'll send you a couple of appliances. One I shot the end out of and the other I'd like to see if it is affecting POI as I think it does on mine.

    This will give you an accurate measurement as well.

    I'd have to look up your snail mail addy so pop it to me and I'll get them right out to you. I'm not using them and if they work for you then you can simply have them. But, remember, now, one of them I think is faulty anyway.

    I think you'll be impressed with how the one that isn't faulty works on DB alone. And, again, I'm highly interested in the actual functionality off POI.

    Shoot it too me, Brother. Waiting on you.

    OH! But do be advised of two things: 1st, packages are slow to get to destinations this time of year and two, I can't get any emails via my personal email. My ISP server is down and I can't receive. Been like that for over 24 hours how so you'll need to use the www.airguninc.org thing of administration@www.airgunsinc.org addy. I can get those.

    Weird, huh? It's because I have 3 servers to deal with: One is the ISP, the other my hosting site and the other the own domain site that is my redirect. Redundancy, and where some little issue like this email problem is circumvented. Still a pain in the arse though.

    But shoot it to me and we'll get it out to you as soon as I'm able.

    I may even send you a bunch of different round types to see if your's like to eat them any better than mine. Can't hurt and I got real good prices on them too. As a matter of fact I owe Bob Vogel, (Mr. Hollowpoint) a report as well as Loren Miller, a bullet maker more into powder burners but has a Sam Yang Big Bore.

    Then we can talk about my sending you my Ultra to see if you like the differences you'll find in it after it's been tuned by Will Piatt (outstanding work, man, simply outstanding).

    Well, I'm off. Not much time this morning. Gotta bug out.

    Shoot me that email. I'll be looking for it i the next 24 hours.

    -A


    _________________www.airgunsinc.org______________
    I've had a few. Now I've only got two.
    It's all I really need!
        





     

    Sponsored content

    Re: 707 RWS Ultra 9MM thread measurement

    Post by Sponsored content


      Current date/time is Sat Nov 18, 2017 8:11 am